GENERATING SET SPECIFICATIONS |
|
Brand |
WEICHAI |
Model |
WPG220F8 (Open) / WPG220L8 (Enclosure) |
Governor and regulation class |
In accordance to ISO 8528-5 Class G2 performance, Compliance to 100% step load less than 10 sec |
Phase number and connection |
3 phase, 4 wires, Y-type |
Cooling method |
Closed looped water-cooled |
Starting method |
DC 12/ 24V Electric starter |
Steady-state voltage deviation |
≤±1% |
Steady-state frequency band |
≤±0.5% |
ENGINE |
||
Brand |
|
BAUDOUIN |
Model |
|
6M16G220/5 |
Gross Power |
kWm |
ESP - 200 / PRP - 182 |
Cylinder / Type / Aspiration |
|
6 / In-line / Turbocharged and intercooled |
Bore x Stroke |
mm |
126 x 130 |
Displacement |
L |
9.726 |
Compression ratio |
|
17:1 |
Brake Mean Effective Pressure |
kPa |
ESP – 1645 |
Governor |
|
Electronic |
COOLING SYSTEM |
||
Type of Coolant |
|
Liquid (water + 50% antifreeze) 35 |
Total Cooling System Capacity (with Radiator) |
L |
105 |
Max coolant temperature – shutdown Cooling |
°C |
415 |
Fan Airflow |
m3/min |
|
LUBRICATION SYSTEM |
||
Operating Temperature range before Engine |
°C |
78 -105 |
Oil fuel consumption ratio based on engine fuel |
g/kW.hr |
≤ 0.1% |
consumption data |
|
|
Total system capacity (including filters) |
L |
30 |
Type of oil filter |
|
Spin-on full flow filter |
EXHAUST SYSTEM |
||
Exhaust Gas temperature after the turbocharger |
°C |
600 |
Exhaust Gas flow |
m3/min |
ESP – 36.02 / PRP – 38.15 |
Max. Exhaust back pressure |
mBar |
60 |
FUEL SYSTEM | |||
Type of fuel filter | Spin-on fuel filter | ||
Min. internal diameter of the supply pipe Min. internal diameter of the return pipe Max. fuel return restriction | mm | 12 | |
Max. fuel inlet temperature Fuel supply flow | mm | 12 | |
Fuel Consumption (Tolerance +3%) | Bar | 0.5 | |
Rating 100%ESP | °C | 50 | |
100%PRP | L/hr | 169 | |
75% PRP | gr/kWh | L/hr | |
50% PRP | 193 | 46.9 | |
25% PRP | 193.8 | 43.1 | |
193.9 | 32.4 | ||
201.6 | 22.4 | ||
226.1 | 12.6 |
ALTERNATOR |
|
Brand |
WEICHAI |
Model |
WHA-200-4/0.4 |
Rated Current |
289A |
Coupling / No. of Bearing |
Direct / Single |
Phase / Poles |
3-Phase / 4-Pole |
Type of Excitation |
Self-excitation |
Cooling type |
Air |
Voltage regulation method |
AVR |
Insurance |
Class H |
Temperature rise |
Class H |
Protection Grade |
IP23 |
Efficiency at 0.8p.f.@100% load |
93.3% |
Engine and block
- Cast iron gantry type structure block
- One-piece forged crankshaft
- Separate cast iron cylinder heads and wet liners
- Aluminum alloy pistons with oil cooling gallery
Cooling system
- Radiator and hoses supplied directly mounted on the engine
- Thermostatically-controlled system with belt driven coolant pump and pusher fan
Air intake and exhaust system
- Mid-position and below inlet turbocharger optimized for genset application
- Special rear-mounted air filter with restriction indicator
- Exhaust manifold shield for heat isolation
- Steel residential silencer -35db(A) attenuation.
Fuel system
- P-type fuel injection pump and injector for higher injection pressure
- Duplex fine filter for better efficiency
Electrical system
- 12/ 24 Vdc electric starter motor and battery charging alternator
- 12/ 24 Vdc maintenance free starter battery and Battery charger connecting cables.
- Low oil pressure & high water temperature sensors
Lubrication system
- Flat bottom large capacity oil pan
- Spin-on full-flow lube oil filter
Alternator
- Brushless, 4 Pole, IP23 drip-proof revolving field design
- Class H insulation and Class H temperature rise
- Low reactance with 2/3 pitch windings on the stator
- Direct-coupled by flexible disc
- Sustained overcurrent >300% in 10 sec
- Direct drive centrifugal blower fan cooling
- Main line 3P circuit breaker
Control module
- WEICHAI control module is ideal for a wide control range to manage, monitor, and diagnose quickly and easily.
- Display status message Provide protection Auto shutdown at fault detection
Main / Emergency Generator sets for Data Centers, Residential Building, Shopping Mall, Hospitals, Industrial Parks, Farms, Mining areas...